Color Run Remover

Fix Color Run Accidents:
Effectively removes unwanted dye transfer from laundry mistakes—ideal for restoring whites after a mixed-wash mishap.
For Use In Sinks, Buckets, or Washing Machines:
Flexible application method—safe for use in front loaders, top loaders, or hand-wash basins. Follow package directions for best results.
Brightens Whites That Have Absorbed Color:
Lifts dye residue from white fabrics to help restore brightness and remove discoloration caused by other garments.
For Colorfast Fabrics Only:
Not recommended for garments that bleed onto themselves or fabrics like silk, denim, khaki, synthetics, leather, suede, or vinyl.

Size

2.6 OZ

Shop Now

Have a question about this product? Contact Us Now.

Product Information

Recommended Usage

Your best chance to fix color run accidents on whites AND colorfast clothing!
On all colors and textiles, even delicates such as wool and silk.

Important Information

Don’t use on fabrics that are not colorfast, including, but not limited to: silk, denim, khaki, synthetic fabric, suede or any garment that has bled into itself. If the dyes have not been properly set on the original garment (colorfast), the original color may be removed as well. See back panel for colorfast test.
Always follow fabric care instructions on the manufacturer's label.
Not suitable for removing stains from suntan lotion, self-tanning products, or products that contain UV-protection.

TEST FOR COLORFASTNESS ON COLORED FABRICS!
PREPARE: Carefully cut packet open; do not tear. Dissolve 1 teaspoon of powder into ¼ cup of hot water.
APPLY: Apply solution to an inconspicuous area of EACH original color of the garment & wait for 5 minutes max, then thoroughly rinse with fresh water & let dry completely.
COMPARE: If ALL original colors remain unchanged, you’re safe to use the product as directed.
CALL: If you have any questions call 1-866-227-2662

Directions

Fill sink or bucket with 3-4 gallons of the hottest water permitted by the fabric care label. Thoroughly dissolve 1 PACK of Color Run Remover into the water. DO NOT add detergent.
Add only the dye-stained garments, ensuring that they are fully immersed. Stir for 1-2 minutes.
Remove garments, rinse thoroughly with warm water and then wash with detergent as usual. Repeat if necessary.

MACHINE WASH (full wash load)

Select the highest water level (do not use water saver mode) & start the wash cycle using the hottest water permitted by fabric care label.
Thoroughly dissolve 3 PACKS of Color Run Remover in the water. Do not add detergent.
Add only the dye-stained garments and immediately run an entire cycle. Repeat if necessary.

Fill the machine with the dye-stained garments only.
Pour 2 PACKS of Color Run Remover into the detergent drawer and flush into the machine with ½ gallon of water.
Set machine program to highest temperature as directed by the garment fabric care labels. Don’t use the economy, pre-wash, or time-delay cycle. Do not add detergent and immediately run an entire cycle. Repeat if necessary